Melbourne Airport has four terminals: T1 for Qantas, T2 for all international flights, T3 for Virgin Australia and T4 for Jetstar and Rex. T1, T2 and T3 are in one building, and T4 is a separate building next door. Your airline decides your terminal, so check your ticket before you leave. At 13 Melbourne Taxi, you can tell us your terminal when you book, and your driver takes you to the right door.
Melbourne Airport Terminals at a Glance
| Terminal | Used for | Building |
|---|---|---|
| T1 | Qantas and QantasLink domestic flights | Main building |
| T2 | All international flights, from every airline | Main building |
| T3 | Virgin Australia domestic flights | Main building |
| T4 | Jetstar and Rex domestic flights | Separate building next door |
Airlines can change terminals, and some airlines use more than one. For example, Qantas flies domestic from T1 but international from T2, so always check whether your flight is domestic or international.
Terminal 1 (T1): Qantas
T1 is the Qantas domestic terminal, also called the North Terminal. It serves Qantas and QantasLink flights across Australia. It has cafes, shops, lounges and check-in kiosks. If you are flying Qantas inside Australia, you go here.
Terminal 2 (T2): International
T2 handles every international flight, whichever airline you fly with. It sits in the middle of the main building, between T1 and T3. Check-in is on the upper level, and arrivals and baggage claim are on the ground floor. T2 also has the most services, including currency exchange, duty-free shops, airline lounges and luggage storage. For international flights, arrive about 3 hours early.
Terminal 3 (T3): Virgin Australia
T3 is the Virgin Australia domestic terminal, also called the South Terminal. It is at the far end of the main building, past T2. Virgin Australia international flights use T2, not T3.
Terminal 4 (T4): Jetstar and Rex
T4 is the budget terminal, used by Jetstar and Rex. It is a separate building next to the main terminals, with self-service check-in and bag drop, so give yourself a little extra time if you have not used the machines before.
Which Terminal Is Qantas at Melbourne Airport?
Qantas domestic flights use T1, and Qantas international flights use T2. QantasLink flights also use T1. If you are on a codeshare ticket or a flight sold by Qantas but run by another airline, check your booking, because the terminal can be different.

Can You Walk Between the Terminals at Melbourne Airport?
Yes, with some limits. T1, T2 and T3 are inside one building, and it takes about 10 minutes to walk from one end to the other. T4 is a separate building, and the walk takes about 10 minutes more. But each terminal has its own security, so once you are inside the departure area of one terminal, you cannot walk into another. You would have to go back out and go through security again.
Changing Between Terminals
If you land on a domestic flight and fly out on an international flight, you must go to T2 and check in again. If your flights are on separate tickets, you collect your bags and check them in again. Leave plenty of time, at least 3 hours, because it takes longer than most people expect.
Getting to and From the Terminals by Taxi
A taxi gives you a door-to-door ride and drops you at the right terminal. From the Melbourne CBD to the airport, a sedan taxi is about 24 km, and the estimated fare is $59 to $73 on the day rate, with the CityLink toll included. From the airport to the CBD, it is $64 to $79, which includes the $5.26 airport pickup fee. See our Melbourne Airport taxi page, or the CBD to Melbourne Airport trip.
Other cars cost a little more. Silver Service adds $11, and an SUV, wagon or maxi taxi adds $17.80. For groups of up to 11, a maxi taxi keeps everyone in one car. If you are travelling with children, ask for a baby or child seat when you book.
The online price is an estimate, so for a fixed price, call 0405 678 001 or get a quote, and we confirm the fare before you travel. There is no surge, no meter and no surprises, and you pay in the car by cash, card or Cabcharge.
How Early Should You Arrive?
| Flight | Arrive before departure |
|---|---|
| Domestic, carry-on only | About 90 minutes |
| Domestic, checked bags | About 2 hours |
| International | About 3 hours |
Add 30 minutes at busy times, such as school holidays, long weekends and early-morning flights. The drive from the CBD takes about 34 minutes outside peak hours, but it can take much longer in the morning and evening rush.
Tips to Avoid the Wrong Terminal
- Check your ticket the day before. The terminal is on your booking.
- Check the airline, not the destination. The same city can be reached from different terminals.
- Tell your driver your airline, flight number and terminal. It takes ten seconds and avoids a long walk.
- Allow extra time in peak hours. Roads around the airport are busy in the morning and evening.
How to Book a Taxi to Any Terminal
Booking takes about 30 seconds. Enter your pickup, drop-off and time on the booking form, choose your car and add your flight number. Nothing is charged online. You can also book in advance for early flights and late landings, and we pick up across metropolitan Melbourne, 24 hours a day.
Conclusion
Melbourne Airport has four terminals: T1 for Qantas, T2 for international, T3 for Virgin Australia and T4 for Jetstar and Rex. Check your airline’s terminal, allow extra time if you are changing terminals, and book your ride in advance. To check your fare, use the booking form, or call 0405 678 001 for a fixed price.